Filter
Top Products
21
Basic Operation
– Recording –
Recording : continued
Notes:
● When recording, it is recommended to use the AC adap-
tor and also install the charged battery. Should the power
failure occur, the power source would be automatically
switched to the rechargeable battery.
● Changing the volume level while recording does not af-
fect the recording.
● You cannot adjust the bass level while recording.
1 Press the REC button.
The record pause mode is entered.
2 Begin playback on the stereo system con-
nected to this portable MD.
To enable the record level to be set.
3 Press the
55
55
5
or
44
44
4
button to adjust the
recording level.
Analog recording
Adjust the recording level so that the maximum
sound volume from the source makes the reading
swing somewhere between –4 dB and 0 dB.
0dB
4dB
Digital recording
You can adjust the level in 1 dB increments within
the range of +12 - –12dB.
Once you adjust the digital recording level, the set-
ting remains even after the recording stops. (For
cancellation instructions, see page 41.)
4 Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode at
the point you wish to start recording.
Here you can select the track to be recorded.
5 Press the MODE button repeatedly to se-
lect the recording mode (page 32).
(Stereo recoding)
(
2 times long recording)
(
4 times long recording)
(
Monaural recording)
6 Press the
0606
0606
06 button to start the MiniDisc
unit recording.
7 Begin playback on the stereo system, the
output will be recorded.
Level meter indicator
+12 - –12dB