Filter
Top Products
You can watch the TV programs with
the tuner of the unit. (Usually channel
3 or 4 of the TV is available for the
RF converter setting.) Be sure to con-
nect the unit to a TV using the Round
Coaxial cable. Refer to page 14.
1
Select channel 3 on your TV.
• Be sure that the unit is in DVD
mode.
2
Press VIDEO/TV button on
the remote control.
•
If noise appears, change the RF
output channel of the unit to CH
4 by pressing VIDEO/TV button
for 3 seconds.The RF output
channel will alternate between
CH3 and CH4 as follows.
•
Changing the RF output channel
is available only when the unit is
in DVD mode.
(
RF ON
)
CH4
3 seconds
(
RF ON
)
CH3
(
RF ON
)
CH4
3 seconds
3 seconds
3 seconds
SPACE
VCR
123
456
78
0
9
CH
VIDEO/TV
SLOW
PAUSE
GHI JKL MNO
PQRS
DISPLAY
TUV WXYZ
DVD
100
RF converter output
Others
for more than
3 seconds
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
2
Troubleshooting (cont’d)
Recording Error
You cannot record more
than 99 titles on one disc.
Recording Error
You cannot record more than
999 chapters on one disc.
Recording Error
You cannot record on this disc
as Control Information is full.
Recording Error
You cannot record on the
disc as Power Calibration
Area is full.
Recording Error
This disc is already finalized.
CauseError message Solution
You are trying to record onto the
disc on which the number of
recording titles comes up to the
maximum (99).
You are trying to record onto the
VR mode DVD-RW disc on which
the number of recording chapters
comes up to the maximum (999).
This disc has no space to write
the Control Information when
recording or deleting contents.
When editing has been repeatedly
performed, the control Information
area may come up to be full even
the recording area has enough space.
When recordings are performed
repeatedly onto an unstable disc,
this area may come up to be full.
Every time you insert a disc for
recording, the disc's working area
will be taken up. And if you repeat
this frequently, it will be used up
sooner and you may not be able
to record full 99 titles.
You are trying to record onto
the disc already finalized.
Delete unnecessary titles
(pages 61, 65, 74).
Delete unnecessary chapter
markers (pages 69, 78).
Delete unnecessary titles
(pages 61, 65, 74).
Insert a new disc.
Release the finalizing for this disc
(page 41).
(The maximum is 99)
(The maximum is 999)
* If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the error
description, and contact a Sharp Authorized Service Center for inspection. (See Service Information on page 103.)