Sharp DV-NC150U MP3 Player User Manual


 
Precautions
6
EN
Note to CATV system installer
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that pro-
vides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected
to the grounding system of the building, as close to the point of cable entry as practical.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories.
CLEANING THE CABINET
¡Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spir-
its, ammonia or abrasive.
CLEANING DISCS
¡When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a
circular motion.
¡Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning
agents or antistatic spray intended for analogue records.
RECOMMENDED MEASURES FOR OPTIMUM PICTURE EXCELLENCE
This Unit is a precision device constructed using extremely accurate technology.
¡The disc cannot be played if the disc drive component is worn out or if the internal pick up lens is dirty.
¡If this unit still does not perform properly although you refer to the relevant sections and to Troubleshooting
Guide on page 29, the laser optical pickup unit may be dirty. Consult a Sharp Authorized Service Center for
inspection and cleaning of the laser optical pickup unit.
DISC HANDLING
¡Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
¡Always store the disc in its protective case when it is not used.
AUTO HEAD CLEANING
¡Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.
¡Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated
on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a
streaky or snowy picture appears during playback, the video heads in your VCR/DVD may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem, please call our help line mentioned on page 28 to locate
a Sharp Authorized Service Center.
Maintenance
Hint
Hint
• Remember to read the instructions along with the video head cleaner before use.
• Clean video heads only when problems occur.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
SERVICING
1.
Please refer to relevant topics in the Troubleshooting Guide on page 29 before returning the product.
2.
Do not attempt to service this Unit yourself. Instead, unplug it and contact a Sharp Authorized Service Center for
inspection. (See Service Information on page 28.)
3.
Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may
cause fire, electrical shock, or other hazards.
4. Following any service or repair, be sure the service technician performs safety checks to certify that this Unit
is in safe operating order.