Sharp DV-NC150U MP3 Player User Manual


 
Hint
Hint
• When a tape with-
out record tab is
inserted, the
VCR/DVD will start
playback automati-
cally.
• Tracking will be
automatically
adjusted upon play-
back.To adjust the
tracking manually,
press the SKIP/CH.
(K/L) buttons.
13
EN
VCR Functions
Recording & OTR (One Touch Recording)
Playback
CH
( TRACKING )
VCR
O
REW FF PLAY RECTIMER
STOP/
EJECT
POWER
OPEN/CLOSE
AV IN 2
VIDEO L(MONO)-AUDIO-R
DVD
PLAYB
STOP
PLAY
123
456
789
0 +10
POWER
SPEED AUDIO
DISPLAY
SKIP CH.
SLOW
VCR TV
PAU S E
REC OTR
DVDVCR
Before:
Turn on the TV and set it to
channel 3.
• If channel 3 is already occupied for broad-
casting, see “RF Output Channel” section.
*See page 11 to switch
the VCR/DVD function.
1
1
2
2
3
3
4
4
1
1
2
2
STOP
EJECT A
3
3
4
4
TV ScreenRemote Control
PLAY
STOP
STOP/EJECT
[VCR/DVD]
/
Accidental erasure prevention
To prevent accidental recording on a record-
ed cassette, remove its record tab. To record
on it later, cover the hole with cellophane
tape.
Record tab
Select the
desired channel
1
1
2
2
with tab
SP
Select the desired tape
speed
3
3
REC
4
4
Type of tape T60 T120 T160
SP mode 1hour 2hours 2-2/3hours
SLP mode 3hour 6hour 8hour
Tape Speed Recording/Playback Time
CH12
TV ScreenRemote Control
123
456
789
0
SPEED
REC/OTR
REC OTR(0:30) OTR(1:00).....
(Normal recording)
OTR
(
8:00
)
OTR
(
7:30
)
5
5
6
6
STOP
STOP/EJECT
[VCR/DVD]
/
Before:
Turn on the TV and set it to
channel 3.
• If channel 3 is already occupied for
broadcasting, see “RF Output Channel”section.
3
3
2
2
CH
( TRACKING )
VCR
REW FF PLAY RECTIMER
STOP/
EJECT
POWER
OPEN/CLOSE
AV IN 2
VIDEO L(MONO)-AUDIO-R
DVD
STOP
PLAY
123
456
789
0 +10
POWER
SPEED AUDIO
DISPLAY
SKIP CH.
SLOW
VCR TV
PAUSE
REC OTR
ENTER
RETURN
TOP MENU
MENU
SETUP
CLEARSEARCH
DVDVCR
1
1
5
5
6
6
5
5
2
2
2
2
3
3
4
4
Hint
Hint
• To view one chan-
nel while recording
another
1) While you are
recording on the
VCR/DVD, press the
VCR/TV button so
that the “VCR” light
disappears on the
VCR/DVD.
2) At the cable box
or satellite box,
select the channel
you want to view.
• If you have connect-
ed the VCR/DVD to
a cable box or satel-
lite box, refer to
“Hint for Cable Box
or Satellite Box”
section on page 8.
STOP
EJECT A
You can select a fixed recording time by press-
ing the REC/OTR button repeatedly.
To cue or review picture during playback
(Picture Search)
Press the g or h button.
• Press it again and the VCR/DVD will search in
super high speed. (in the SLP mode only)
To freeze the picture on TV screen during play-
back (Still mode)
Press the PAUSE button. Each time you press the
button, the picture will be forwarded by one frame.
• If the picture begins to vibrate vertically during the
still mode, stabilize the picture by pressing the
SKIP/CH. (K/L) buttons.
• If the picture is distorted or rolling vertically, adjust
the vertical hold control on your TV, if equipped.
Counter Reset
Press the CLEAR/C.RESET button.
To play back in slow motion
Press the SLOW button during playback or the still
mode.
• If the noise bars appear on the TV screen, you can
reduce it by pressing the SKIP/CH. (K/L) buttons.
Auto Rewind
When a tape reaches its end during playback, fast-for-
ward, or recording (except timer recording and One
Touch Recording), the tape will automatically rewind
to the beginning. After rewinding finishes, the
VCR/DVD will eject the tape.
Other Operations
Hint
Hint
Still/Slow/Pause
mode will be
automatically
cancelled after 5
minutes to pre-
vent damage to
the tape and the
video head.
• To return to
playback from
the Picture
Search/Still/
Slow mode,
press the PLAY
button.
VCR Functions
4
4
SKIP/CH.
VCR
VCR
VCR
VCR
Yo u CANNOT copy a DVD to a videotape.
To stop recording temporarily (Pause mode)
Press the PAUSE button.
• During the rec-pause mode, five
C
marks appear on the TV
screen. Each
C
mark represents one minute.
• Press it again to resume recording.
VCR
VCR