Sharp DK-CL8PH(GR) MP3 Docking Station User Manual


 
E-16
2011 September 15
DK-CL8PH EN_A6_p01-p18.fm
DK-CL8PH
ENGLISH
9
3
8
7
6
5
4
2
1
10
References
Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation inside
the cabinet.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1
hour).
If problem occurs
When this product is subject during operation to strong external
interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is operated
incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on
again.
2 If the unit is not restored in the previous operation, unplug
and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, remove the backup
batteries.
Clearing all the memory (reset)
In Audio In (AU) function, press button then press and hold
/ button for 5 seconds. Unit will display “ ” for a while and unit
will reset.
Caution:
This operation will erase all data stored in memory including
clock, alarm settings and tuner preset.
Before transporting the unit
Undock the iPod or iPhone from the unit. Then, set the unit to
the power standby mode. Carrying the unit with iPod or iPhone
left docked might damage the systems.