Filter
Top Products
E-2
2011 September 15
DK-CL8PH EN_A6_p01-p18.fm
DK-CL8PH
ENGLISH
9
3
8
7
6
5
4
2
1
10
General Information
Precautions
■ General
● Do not place anything on top of the unit.
● Do not expose the unit to moisture, to temperatures higher
than 60°C (140°F) or to extremely low temperatures.
● If your system does not work properly, disconnect the AC/DC
adaptor from the wall socket. Plug the AC/DC adaptor back in,
and then turn on your system.
● The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
● No naked flame sources, such as lighted candles, should be
placed on the apparatus.
● Attention should be drawn to the environmental aspects of
battery disposal.
● This unit should only be used within the range of 5°C - 35°C
(41°F - 95°F).
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible
for any damage resulting from use of this unit with a voltage
other than that which is specified.
■ Volume control
The sound level at a given volume setting depends on speaker
efficiency, location and various other factors. It is advisable to
avoid exposure to high volume levels. Do not turn the volume on
to full at switch on. Listen to music at moderate levels.
● Please ensure that the equipment is
positioned in a well-ventilated area
and ensure that there is at least 10
cm (4") of free space along the sides,
top and back of the equipment.
● Use the unit on a firm, level
surface free from vibration.
●
Keep the unit away from direct
sunlight, strong magnetic
fields, excessive dust, humidity
and electronic/electrical
equipment (home computers,
facsimiles, etc.) which
generate electrical noise.
● In case of an electrical storm,
unplug the unit for safety.
10 cm (4")
10 cm (4")
●
Hold the AC/DC adaptor by the
head when removing it from the
wall socket, as pulling the lead
can damage internal wires.
●
The AC/DC adaptor is used as a
disconnect device and shall
always remain readily operable.
● Do not remove the outer
cover, as this may result in
electric shock. Refer internal
service to your local SHARP
service facility.