Sanyo 1180 MP3 Player User Manual


 
DMC 1180/DMC 2020 series MP3/WMA/SMV Player User Guide file:///D:/English/guide.htm
2 of 17 5/15/2008 3:39 PM
FM Radio with 20 presets
FM Recording
1GB or 2GB mass storage device
Integrated USB connector
Backlit display
Superb audio quality
System support:
Supports Windows Me/2000/XP.
Note for Windows 2000 users: Windows Service Pack 3 must be installed before installing MP3 Player drivers.
Supports Windows 98 SE after installation of drivers (see below).
Supports Mac OS X (version 10.2.6 or above) without driver.
Note:
To minimize damage from static electricity, avoid operating the player in an extremely dry household environment.
The product may malfunction and require the user to reset the product.
Battery management
Battery: Built-in 530mAh Rechargeable Lithium ion battery
Charge: Connect the MP3 Player to the computer. Press and hold "Power on/off " button for few seconds until a battery
icon appears on the top of the MP3 Player's screen. The battery is charging.
Note: Please recharge the battery when the screen displays Low Battery. For longest battery life, it is best to let the
battery discharge until the
Low Battery
icon appears, before recharging.
After many cycles of charging and discharging, the battery will need to be replaced. Please contact our Help line at
1-800-263-2244. DO NOT ATTEMPT TO CHANGE THE BATTERY YOURSELF.
Installing the MP3 Player
Installation of drivers for computers using
Windows Me/2000/XP
is not necessary.
Note for Windows 2000 users:
Windows Service Pack 3
must be installed before installing MP3 Player drivers.
Windows 98 SE users will need to install the MP3 Player on their system:
Click on the link below to open the folder containing the MP3 Player installation program.1.
Click on the Setup
icon to begin the installation.2.
Follow the on-screen instructions to complete the installation.3.