Filter
Top Products
23
Clock and Alarms
Setting the time format
The clock display used in stand-by mode and on the playing mode
screens can be set to 12 or 24 hour format. The selected format is
then also used when setting the alarms.
1. Press and hold the Info/menu button to enter the menu setting.
2. Rotate the Tuning control until CLOCK 12H/24H appears on
the display, then press and release the Seek / Select button to enter
the setting and the setting of time format begins to flash.
3. Rotate the Tuning control to select either 12 or 24 hour format.
Press and release the Seek / Select button to confirm your choice of
clock format. The display will then revert to the previous menu.
4. Press and release the Info/menu button and the LCD will revert to the
normal display.
If the 12 hour clock format is chosen, the radio will then use the12 hour
clock for the setting of alarms with a PM indicator.
2,3
1,4