Filter
Top Products
12
GB
Using the radio for the first time
Using the AC power adaptor
The AC power adaptor required for this unit should be 12 volts AC
at 1.6A.
Insert the adaptor plug into the AC socket on the rear of the radio.
Plug the adaptor into a standard mains socket outlet.
The AC adaptor should be disconnected from the main supply when not
in use.
Backup battery operation (for US version only)
1. Remove the battery cover on the bottom of the unit.
2. Insert two UM-4 (AAA size) batteries into the spaces in
the compartment.
3. Take care to ensure all batteries are inserted with correct polarity as
shown inside the compartment. Replace the battery cover.
4. When the low battery capacity indicator shows on the display please
replace the batteries immediately.
5. When the radio is used as clock radio or as an alarm, please always
keep the batteries inserted.
Getting started with external accessories
You may use an optional AM Radio Antenna as external antenna if
satisfactory reception cannot be obtained. Connect the optional AM
radio antenna to the AM external antenna terminal and ground
terminal located on the rear panel. See figure 5, 6.