Filter
Top Products
CHAPTER THREE
Operation
3
3
23
Memorizing Channels
Before you can use any of the special channel buttons (CH ▲▼, FAV-CH), the available
channels must first be scanned and memorized. This is an easy, automatic process that
typically takes two minutes. To memorize channels:
1
Press the MENU button on the remote control.
2
Use the Menu Up/Down buttons
to highlight the Channel icon and
press ENTER.
Use the Menu Up/Down
buttons to highlight the
Memorize Channels and
press ENTER.
3
Use the Menu Up/Down but-
tons to select Air or Cable
(STD, HRC or IRC).
Press ENTER.
4
That’s it. The Set-Top Box will automatically scan and store all
of the digital (DTV) channels that are available in your local
area.
5
Press EXIT when channel memorization is complete.
NOTES
The Set-Top Box MUST be connected to an antenna in order to receive digital TV signals.
Even if a particular channel is deleted from the memory, you can always tune to that chan-
nel directly by using the number buttons on the remote control.
Memorize Channels
√√
Add / Delete Channels
√√
Check Signal Strength
√√
CHANNEL
CHANNEL
Air
STD
HRC
IRC
Memorize Channels
Memorize Channels
MD68-00XXXA(E)-CHAPTER 3 4/4/03 11:10 AM Page 23