Filter
Top Products
ENG-26
I
NITIAL
S
ETUP
Memorizing the Channels
Selecting the Video Signal-source
This feature allows you to manually set the DVD-VCR’s tuner band to Antenna or Cable, whichever you
connected to the Antenna In jack during initial setup.
Use this setting only if Auto Setup detected the incorrect tuner band, i.e. channels are coming in on the wrong
channel numbers.
1
Press the MENU button.
2
Press the ➐✓❷ buttons to
select
Setup, then press the ❿
or ENTER button.
3
Press the ➐✓❷ buttons to
select Channel, then press the
❿ or ENTER button.
4
Press the ❿ or ENTER button
to select Cable TV or
Antenna.
▼
- Cable TV: Select this if the DVD-VCR
is connected to Cable TV.
- Antenna: Select this if the DVD-VCR
is connected to an indoor or outdoor
VHF/UHF antenna.
00956B V8650 XAA_Eng1 31/3/06 06:58 Page 26