Filter
Top Products
7
Español Italiano Français Deutsch English
Connections
Attaching the Rubber Feet
(Included)
Precautions When Connecting
and Turning on the Power
921
• To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power on
all devices before making any connections.
926a modify
• Using a connection cable that contains a resistor can cause the
sound level to be low. Use a connection cable that does not
contain a resistor.
941
• Once the connections have been completed, turn on power to
your various devices in the order specified. By turning on devices
in the wrong order, you risk causing malfunction and/or damage
to speakers and other devices. (When turning the power off,
reverse this procedure.)
< Connected devices
→
MA-15D>
942
• This unit is equipped with a protection circuit. A brief interval (a
few seconds) after power up is required before the unit will
operate normally.
945
• If you need to turn off the power completely, first turn off the
POWER switch, then unplug the power cord from the power
outlet. Refer to
Power Supply
(p. 5).
Connection Example
INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Sound Module, CD Player, MD Player, etc.
Rear Panel
select
MA-15D_egfis.fm 7ページ ２００５年１０月３１日 月曜日 午後７時１６分