Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
36
4. Press the EQ/UBS button again and "User Treble 0" will be displayed.
The default Treble level is 0.
5. Press the Skip Up or Down buttons to adjust the required Treble
level between +/-5.
Note: If no button is pressed within 5 seconds the equaliser menu will
exit and your changes will be accepted.
Ultra Bass System (UBS)
1. You can activate and deactivate the UBS (Ultra bass system) by
pressing and holding the EQ/UBS button until the display shows
'UBS On" or "UBS Off".
2. The first press shows the current setting. Subsequent presses alternate
between UBS On and UBS Off. After 5 seconds the display will revert
to the prior display mode.
Note: The unit cannot access this feature while one of the EQ modes
is displayed. If you have just set an EQ mode, please wait for the
display to cancel first before attempting to control the UBS function.
4
1
5
5