Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
14
Dynamic Range Control (DRC) settings - DAB only
Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment. This
function is only available for the DAB waveband.
1. Press the On/Off button [On/off on remote control] to switch on your
radio.
2. Press and release the Menu button until "Station order" appears on
the display.
3. Press and release the Skip Up and Down buttons until the display
shows "DRC value".
4. Press and release the Select button to enter adjustment mode. The
top line of the display will show the currently applied DRC setting.
5. Press and release the Skip Up or Down buttons to select the required
DRC setting (default is 0) .
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
6. Press and release the Select button to confirm the setting. The display
will return to radio mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect,
1
2
3,5
3,5
4,6