Roberts Radio CRD40 Clock Radio User Manual


 
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
28
12. When the clock radio display is set to show both the time and date
the alarm symbol will appear if an alarm is set. To toggle between
the large time display and time and date press the Display button.
Note: When the alarm is set to wake by radio, the last used station will be
switched on at the alarm time.
When the alarm activates, the volume will start from minimum and in-
crease in level every 2-3 seconds. The alarm will sound for 90 minutes
unless cancelled.
Make sure that a CD is inserted when choosing CD as the alarm mode.
If a CD is not present at the alarm time the buzzer alarm will be used
instead. If the CD which is in the radio was the CD most recently played,
then the CD Bookmark feature will cause playback to resume from the
point where playback was previously stopped.
View the alarm time
1. Repeatedly press the Alarm button to view the time settings for Alarm
1 to Alarm 4.
To cancel the alarm
1. While an alarm is sounding it can be cancelled for 24 hours by press-
ing the Standby button.
2. To permanently cancel an alarm, enter the alarm setup menu for the
alarm that you wish to cancel and set the alarm mode to the 'OFF'
option (see step 9 on the proceeding page).
1
1
12