Roberts Radio CRD40 Clock Radio User Manual


 
11
Manual Tuning - DAB
Manual tuning allows you to tune directly to the various DAB Band III
channels. UK DAB stations are located in the range 11B to 12D.
1. Press and release the Menu button until the display shows "Station
order".
2. Press the Skip Up or Down buttons until "Manual tune" appears on
the display. Press and release the Select button.
3. Press the Skip Up or Down buttons to select the required DAB
channel.
4. Press and release the Select button the open bar in the middle shows
you the minimum signal strength needed for good DAB reception. The
signal bars will go up and down showing the changing signal strength
as you adjust the wire aerial or your clock radio position.
5. Press and release the Select button to return to normal tuning
mode.
Signal strength display - DAB
1. Press and release the Select button the lower line of the display
shows signal strength. Position your radio and angle the wire aerial
for best reception using the signal strength display as a guide. Move
your radio around and position so as to give maximum number of
black rectangles on signal strength display.
2. The clear unfi lled rectangle indicates minimum signal level required for
satisfactory reception. Press and release the Select button to return
to normal tuning mode.
1,2
2,3
2,3
1
2,4,5