Filter
Top Products
11
Recalling a preset station
1. Press the On/off button to switch on the radio.
2. Press the Preset button.
3. Use the Tuning up or down buttons to select the desired preset
number and press the Select button. Your clock radio will tune to the
station stored in the preset memory.
1
2
3
3
1
2
3
3
Setting the alarm time
Your clock radio has four separate alarms which can be set to wake you
to either radio or beep type alarm. Each alarm can be set to sound once,
daily, weekdays and weekends. The alarms can be set with the radio in
the on or the off position. In the event of a power interruption your clock
radio has a built in memory chip that will maintain all your alarm settings
when the power is restored.
Note: If no buttons are pressed for 5 seconds the clock radio will
exit the alarm setup.
To exit the alarm menu at any time press the Menu button.
1. Press the On/off button to switch on your clock radio.
2. Press the Alarm button and "Set alarm" will appear on the display.
3. Press the Select button to enter the alarm setup. If there are no alarms
set the display will show "Alarm not in use".