Filter
Top Products
5
Listening to the Radio
1. Switch on your CD clock radio by pressing the On/Off button. The
On indicator LED will light.
2. Slide the Function switch to the required waveband.
3. Tune in to the desired station by rotating the Tuning control. The
station frequency is indicated in the dial scale.
The Wire aerial located on the rear of your CD clock radio is for
FM reception. The wire should be fully extended and positioned for
optimum reception.
For MW reception there is a built in ferrite aerial. Rotate your CD clock
radio to the position giving best reception.
4. Adjust the volume by rotating the Volume control.
5. When listening to FM stereo stations (Function switch in FM St.
position) and the station being received is weak, some hiss may be
audible. To reduce the hiss slide the Function switch to the FM
position. The stereo indicator will switch off and reception will be
in continue in mono.
6. The radio can be switched off by pressing the On/Off button. The
On indicator will switch off.
1
2
3
4
6
5