Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
12
Setting alarm times
The alarms can be set to wake you by a buzzer, CD or the radio. Your
CD clock radio has 2 separate alarms which can be set to activate at
different times.
Setting alarm 1
1. Slide the Alarm 1 function switch to the 'Adj' position. Alarm 1 time
will flash in the display.
2. Press the down button to set minutes and the up button to set the
hour. Release the buttons when the correct time is reached. Alarm
1 time will continue to flash in the display. The clock uses a 12 hour
display with a PM indicator. Ensure that the correct 12 hour cycle
is selected.
3. Return the Alarm 1 function switch to the 'Off' position. The
display will revert to showing time.
Note: Incorrect display will result if both the Alarm function switches
are set to the 'Adj' position.
Setting alarm 2
1. Slide the Alarm 2 function switch to the 'Adj' position. Alarm 2 time
will flash in the display.
2. Press the down button to set minutes and the up button to set the
hour. Release the buttons when the correct time is reached. Alarm
2 time will continue to flash in the display. The clock uses a 12 hour
display with a PM indicator. Ensure that the correct 12 hour cycle
is selected.
3. Return the Alarm 2 function switch to the 'Off' position. The
display will revert to showing time.
2
2
2
2
1
3
1
3