Filter
Top Products
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
16
Setting alarms to wake to buzzer
A beep tone will sound when using the buzzer alarm. The alarm beep will
increase in volume every 15 seconds for one minute followed by one
minutes silence before repeating the cycle.
The buzzer alarm will sound for one hour unless turned off by pressing
the On/Off button. Pressing the On/Off button whilst the alarm is
sounding will cancel the alarm for 24 hours.
Note: the buzzer alarm sound level is controlled by the Sound level
control (see page 18)
1. Press the Alarm 1 or Alarm 2 buttons alarm 1 or alarm 2 time will
flash in the display.
2. Press the Set button, alarm hour will flash in the display.
3. Press the up or down button to adjust the hour. The clock uses a 12
hour display with a AM/PM indicators. Please ensure that the correct
12 hour cycle is selected.
4. Press the Set button, minute will flash in the display.
5. Press the up or down button to adjust the minute.
(continued on next page)
2
3
3
4
1
1
5
5