Filter
Top Products
30 Ray54 VHF Radio
4.13 USER Channel Mode
Press and hold the HL/USER key while in normal operation mode to enter
User Mode. The USER and SAVED indicators appear.
User Channel Mode displays only the channels that you have saved to
memory, which enables you to easily use your favorite channels while
bypassing unwanted or seldom-used channels during a scan.
Note: The procedure for saving a channel to memory is outlined in Section
4.11, Adding Channels to Memory.
While in User Mode the following operations can be performed:
• Press and release the SCAN/SAVE key to start Memory Scan mode.
• Press and hold the SCAN/SAVE key to delete the current channel from
memory list.
• Press 16/9 to end User mode and switch to the Priority Channel.
Press and release the CLEAR/WX key to quit User mode and return to the
last-used working channel.
Press and hold the HL/USER key for 3 seconds to quit User mode and return
to the last-used working channel.
Note: You cannot switch Channel Sets while in User Mode.
4.14 DSC Call Operation
Press and release the CALL/MENU key while in normal operation mode to
enter Call Mode.
DSC Call mode is fully described in Chapter 5.
4.15 Menu Mode Operation
Press and hold the CALL/MENU key while in normal operation mode to
enter Menu Mode.
Menu mode is fully described in Chapter 6.