Filter
Top Products
18
RESETTING THE CLOCK
If the clock stops operating properly or locks up, you can reset
it. To reset the clock, use a pointed object such as a straight-
ened paper clip to press
RESET
on the back of the clock.
All display segments briefly appear, then the clock starts to
scan for a radio signal.
Modifying or tampering with the clock’s internal components
can cause a malfunction and might invalidate its warranty. If
your clock is not performing as it should, take it to your local
RadioShack store for assistance.
63-968.fm Page 18 Friday, July 2, 1999 2:19 PM