Filter
Top Products
12
OPERATION
To switch between viewing the seconds display and the day of
the week, press
MODE/SET
. To switch between viewing the
month/date and the alarm time, press
ALARM
STOP/ALARM
SET
.
Note:
After the clock successfully receives a good signal,
appears for about 96 hours. It might change during the radio
signal reception times but will return to at the end of the re-
ception time.
To test the reception at a specific location and update the set
time at any time (instead of waiting for the preprogrammed
times), turn off automatic time setting, then turn it back on (see
“Turning Automatic Time Setting Off/On” on Page 16).
CHANGING THE TIME ZONE
The clock automatically shows a time zone (P for Pacific, M for
Mountain,
C for Central, or E for Eastern). You can set it if nec-
essary to show your time zone. To change the time zone, re-
peatedly press
ZONE/AUTO
OFF
until your time zone is
highlighted.
USING THE ALARM
Setting the Alarm Time
1. Hold down
ALARM STOP/ALARM SET
until the alarm hour
digits flash.
63-968.fm Page 12 Friday, July 2, 1999 2:19 PM