Filter
Top Products
16
Attaching the Battery Pack
Refer to the following steps to attach the Battery Pack:
1. Place the DVD Player on a soft and smooth surface with the bottom of the unit
facing up.
2. With one hand on the DVD Player to prevent it from moving, take the battery
and align the plastic tabs on the battery pack with holes on the player, and push
the battery pack into the DVD Player.
3. Slide the Battery Pack until you hear it click.
Charging the Battery Pack
The battery pack must be attached to the DVD player to be charged by using the
supplied power Adapter.
1. Attach the battery pack to the DVD player
2. Plug the supplied power adapter into the player’s power jack marked with “DC
9.5V IN”, which is located on right side of the DVD Player.
3. Plug the other end of the power adapter into a household outlet as shown
below:
About the
Rechargeable Battery