Filter
Top Products
19
English
AZ 5140/98 page 19
CASSETTE RECORDER
1. Set the source selector to FM or MW.
2. Tune to the desired radio station using the TUNING knob.
3. Press
9/
to open the cassette holder.
4. Insert a blank tape.
5. Press 0 to start recording.
6. For brief interruptions, press ;. To resume recording,
press ; again.
7. To stop recording, press
9/
.
1. Set the source selector to CD•VCD.
2. Insert a CD and if desired, programme track numbers.
3. Press
9/
to open the cassette holder.
4. Insert a blank cassette.
5. Press 0 to start recording.
™ Playing of the CD programme starts automatically from the
beginning of the programme.
6. For brief interruptions, press ;. To resume recording,
press ; again.
7. To stop recording press
9/
To select and record a particular passage within a track
1. Press and hold ∞ or § on the set to select a passage.
2. Put the CD player in
;
position at the selected passage.
™ Recording will start from this exact point when you press 0.
3. Press
2;
to start recording.
To ensure a good recording and playback of the tape deck, clean
parts A,B and C show in the diagram below, after approx. 50 hours of
operation, or on average once a month. Use a cotton bud slightly
moistened with alcohol or a special head cleaning fluid to clean the deck.
•Open the cassette holder by pressing
9/
.
•Press 1 and clean the rubber pressure rollers C.
•Press ; and clean the magnetic heads A and also the capstans B.
•After cleaning, press
9/
.
Cleaning of the heads can also be done by playing a cleaning
cassette through once.
AABC
SYNCHRO START CD RECORDING
RECORDING FROM THE RADIO
TAPE DECK MAINTENANCE
P001-021_AZ5140_98-Eng 3/11/05 9:50 Page 19