Filter
Top Products
8
Setting the time/date on the video recorder
In all the steps below, press buttons
TU
or digit buttons
0-9
.
1 Press button
MENU/TRACKING
. Select CLOCK SETT-
INGS in the main menu. Now press button
OK
.
The word ’MENU’ will appear in the display on the video
recorder during the next steps.
2 Set the current time (TIME).
When you enter minutes, seconds will automatically be
set to ’0’.
3 Now press button
OK
again.
Set the current date (DATE).
4 Now press button
OK
again.
Now set the current month (MONTH).
5 Now press button
OK
again.
Now set the current year (YEAR).
6 Press button
OK
again, followed by
MENU/TRACKING
. You have now finished setting the
time and date.
7 Press button
MENU/TRACKING
to exit from the main
menu.
TIME : 13:45
DATE : 28
MONTH: 02
YEAR : 98
------------------------
vw/0-9 OK/MENU
Basic settings
Define the basic settings on your appliance: input via SCART
or BNC socket, position of OSD, camera synchronisation and
locking function.
1 In the main menu, select the ’BASIC SETTINGS’ line.
2 Select the ’SCART’ or ’BNC’ socket as the recording
source (REC SOURCE).
If no recording source has been connected or if the
recording source has been incorrectly selected in the
basic settings, ’NO VIDEO’ appears in the display.
3 Select the position of the OSD (OSD POS): bottom left
(L-BOTTOM), bottom right (R-BOTTOM), top left (L-UP-
PER), top right (R-UPPER), OFF.
4 Select ’artificial synchronisation’ (V SYNC) INT or EXT.
5 Select the lock function (SEC CODE) with (ON) or (OFF).
See the chapter ’Special Features’ for more information.
BASIC SETTINGS
REC SOURCE BNC
RS 232 ON
OSD R-BOTTOM
V SYNC INT
BEEP N
PLAY MODE 24HA
SEC CODE OFF
------------------------
vw/S OK/MENU
Note:
* Always leave the video recorder connected to the
mains so as not to lose the basic settings.