Filter
Top Products
15
Problem Possible cause
The video recorder does not react when you press
any buttons.
* No power.
* A programmed recording is currently being made.
* Technical fault - Disconnect from the mains for 30 seconds and
then reconnect. If that does not help, you can: 1. Disconnect from
the mains. 2. Press and hold button
hSTOP
on the machine and
reconnect to the mains. All the data memories will be reset
(deleted).
No playback from video recorder * No recording on the cassette.
* The wrong VCR channel number on the television set has been
selected, or the channel has been set wrong.
* The connecting cable between the monitor/television set and the
video recorder has been disconnected.
Bad playback quality on video recorder * Use TRACKING function if the recording was made on another
machine.
* Poor quality or worn cassette.
The programmed recording function does not work * Time wrongly programmed.
* Time/date not properly set.
* A cassette with erase protection has been inserted.
7. TROUBLESHOOTING