Philips SA4VBE MP3 Player User Manual


 
24 EN
12 Technical data
Power
Power supply: 290 mAh Li-ion polymer
internal rechargeable battery
Play time¹
Music (.mp3): up to 20 hours
(FullSound off); up to 12 hours
(FullSound on)
Video (.mp4): up to 4 hours
Software
Philips Media Converter: to convert
and transfer³ videos
Philips Device Manager: to update the
rmware and recover the player
Connectivity
Headphone 3.5 mm
USB 2.0 High speed
Sound
Channel separation: > 45 dB
Frequency Response: 80-18,000 Hz
Output power: 2 x 2.4 mW
Signal to noise ratio: > 84 dB
Audio playback
Supported formats:
MP3
Bitrate: 8-320 kbps and VBR
Sampling rates: 8, 11.025, 16, 22.050,
32, 44.1, 48 kHz
WMA (unprotected)
Bitrate: 5-320 kbps
Sampling rates: 8, 11.025, 16, 22.050,
32, 44.1, 48 kHz
Video playback
Supported formats:
AMV
Picture display
Supported formats:
JPEG
BMP
Storage media
Built-in memory capacity²:
SA4VBE04 4GB NAND Flash
SA4VBE08 8GB NAND Flash
SA4VBE16 16GB NAND Flash
Media transfer³
Media Converter (video transfer)
Windows Explorer (drag and drop)
Display
Color LCD 128 x 160 pixels
Note
Specications are subject to change without notice.
¹ Rechargeable batteries have a limited number of
charge cycles. Battery life and number of charge cycles
vary by use and settings.
² 1GB = 1 billion bytes; available storage capacity is less.
Full memory capacity may not be available as some
memory is reserved for the player. Storage capacity
is based on 4 minutes per song and 128 kbps MP3
encoding.
³ Transfer speed depends on operating system and
software conguration.
PC requirements
Windows® XP (SP3 or above) / Vista /
7/ 8
Pentium III 800 MHz processor or higher
512 MB RAM
500 MB hard disk space
Internet connection
Windows® Internet Explorer 6.0 or later
USB port