Philips SA4ARA 08 MP3 Player User Manual


 
11EN
3 Get started
Charge power
ARIAZ has a built-in battery that can be
charged through the USB port of a computer.
Connect ARIAZ to a PC by using the USB
cable.
Note
When you connect ARIAZ to a computer, you are
briey prompted to select: [Charge & transfer] or
[Charge & play]. If no option is selected, [Charge &
transfer] applies.
To play ARIAZ when you charge power, select [Charge
& play].
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100% 75% 50% 25% 0%
» A ashing battery screen indicates that
the battery is low. The player saves
all settings and switches off within 60
seconds.
Note
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
The charging animation stops and the icon is
displayed when the charging process is completed.
To conserve battery power and increase the
play time, do the following on ARIAZ:
Set the backlight timer to a low value
(go to > [Display settings] >
[Backlight timer]).
Switch the player on or off
Press and hold until the player is switched
on or off.
Automatic standby and shut-down
The player has an automatic standby and shut-
down feature that can save battery power.
After 5 minutes in idle mode (no play, no
button is pressed), the player switches off.