Filter
Top Products
10 EN
4 Update VIBE
VIBE is controlled by an internal program called
rmware. Newer versions of the rmware may
have been released after you have purchased
VIBE.
The software program called Philips Songbird
can use your computer to check for rmware
updates that are available on the Internet.
Install Philips Songbird on your computer
(see chapter Install software) and follow the
instructions to update (see chapter Manually
verify / update the rmware).
Note
Your music les are not affected by a rmware •
update.
Manually verify / update the
rmware
1 Ensure that your computer is connected
to the Internet.
2 Connect VIBE to the computer (see
section Connect and charge for
instructions).
3 On your computer, click Start >
Programs > Philips > Philips Songbird to
launch the Philips Songbird application.
4 Select Tools > Updates
» Philips Songbird checks for updates
and installs new rmware from the
Internet, if available.
5 Follow the on-screen instructions to
update the rmware of VIBE.
6 Wait until the update is completed, then
disconnect VIBE from the computer.
VIBE restarts after the rmware is »
updated and is ready for use again.