Filter
Top Products
30 EN
16 Troubleshooting
If SA060 is not working properly or the display
freezes, you can reset it without losing data:
How do I reset SA060?
Insert a pen tip or other object into the
reset hole located at the bottom of SA060.
Hold until the player shuts down.
If the reset option is unsuccessful, follow
the steps how to recover SA060 with the
Philips Device Manager:
1 On your computer, select Start >
Programs > Philips > Philips MP3 player
> GoGear SA060 Device Manager to
launch the Philips Device Manager.
2 Turn off SA060 before you continue.
3 Press and hold the volume button while
you connect SA060 to your computer.
4 Keep holding the key until the Philips
Device Manager acknowledges SA060 and
enters the recovery mode.
5 On the computer, click the Repair button
and follow the instructions of the Philips
Device Manager to complete the recovery
process.
6 When the recovery is completed,
disconnect SA060 from your computer.
7 Restart SA060.