Filter
Top Products
EXTERNAL RECORDING (UN)FINALIZING, ERASING
22
In recording mode tracks will be incremented automatically
such that the track numbers are positioned on the same
position as the original.
• To switch the automatic track increment function on, press
as often as necessary TRACK INCR. on the remote control
during stop when CDR is selected.
yAuto Tr ON is displayed and the function is
switched on. Track increments are now automatically
detected from digital source material. In analogue
source material a silence of 2.7 seconds or more is
detected as a track increment.
• To switch the automatic track increment function off,
press as often as necessary TRACK INCR. on the remote
control during stop when CDR is selected.
yAuto Tr OFF is displayed and the function is
switched off. Track numbers can now be incremented
manually by pressing TRACK INCR. on the remote control
during recording. The minimum track length is 4 seconds.
Notes: – Track numbers cannot be changed after recording.
– The automatic track increment only works with
consumer sources with a digital output signal
according to the IEC 958 (consumer part) audio
standard. DAT, DVD and DCC do not deliver this signal.
Finalizing a CDR(W) disc is a simple procedure, necessary to:
– play a recorded CDR on a standard CD player,
– play a recorded CDRW on a CDRW compatible CD player
and CD recorder,
– avoid further unwanted recordings on a disc, or
– avoid erasure of tracks on a CDRW.
Notes: – Finalizing will take about 2–4 minutes.
– After finalization of the CDR(W),
CDR
(W) changes to
CD on the display.
– During finalization no other operating commands
can be executed.
Auto finalizing
When using either CD™CD or COMPILE CD, your recordings
will be finalized automatically (see “High speed recording and
automatic finalizing”).
Manual finalizing when recording is in progress
1 Press FINALIZE on the set during recording.
yAuto Final? is displayed.
2 Press YES to confirm.
yFINALIZE is shown. The finalization will start after
recording and the actual finalizing time remaining will
start to count down.
Manual finalizing when recording is stopped
1 Insert the CDR(W) you want to finalize in the CD recorder tray.
2 Press CDR to select the CD recorder.
3 Press FINALIZE on the set.
yFinalize? is displayed.
4 Press YES to start finalizing.
yFINALIZE is shown, Final is displayed and the actual
finalizing time remaining starts to count down.
Finalizing CDR(W) discs
Automatic track increment
English
R
EC
TY
PE
EDIT
C
O
M
P
IL
E
C
D
F
IN
A
L
IZ
E
E
R
A
S
E
C
D
C
D
RECORD