Filter
Top Products
BASIC FUNCTIONS
14
• Press either CD 1, CD 2 or CD 3 to select a particular disc.
Selecting a track during playback
• Rotate í JOG CONTROL ë (pressí or ë on the
remote control) to skip to the beginning of the previous or
next track on the selected disc.
yPlayback continues with the selected track.
Selecting a track when playback is stopped
1 Rotate í JOG CONTROL ë (pressí or ë on the
remote control) to skip to the required track number.
2 PressÉ PLAY/PAUSE (Éon the remote control) to start
playback.
yPlayback starts with the selected track.
Note: Instead of using í or ë on the remote control you
can also directly key in the required track number by
using the numerical keys. For 2-digit numbers, press the
keys in rapid succession.
Searching for a passage during playback
1 Keep à SEARCH or á SEARCH (à or á on the remote
control) pressed to find a particular passage in backward or
forward direction.
ySearching is started and playback continues at a low
volume. After 3 seconds the search speeds up with
volume muted.
2 Release the key at the desired passage.
yNormal playback continues.
Note: During SHUFFLE, while repeating a track or playing a
program, searching is only possible within the current
track.
Repeating a track, the disc or the program
1 Press repeatedly REPEAT on the remote control during
playback to select either:
yREPEAT TRACK: The current track is played repeatedly.
yREPEAT DISC: The entire selected disc is played
repeatedly.
yREPEAT ALL: All discs in the CD changer (or the program)
are (is) played repeatedly.
2 Playback starts in the chosen mode.
3 To return to normal playback, press REPEAT on the remote
control until the display indication disappears.
Note: REPEAT DISC is not possible during SHUFFLE or while
playing a program.
Playing tracks in random order
1 Press SHUFFLE on the remote control during playback.
ySHUFFLE is shown and either all tracks of the program or
of the loaded disc(s) in the CD changer or CD recorder
are played in random order.
2 To return to normal playback, press SHUFFLE again.
This feature allows the display of information such as album
title or track title contained on a specially encoded CD.
• Make sure to insert a CD with CD text.
yCD TEXT is shown and the album title is scrolled once.
CD text when playback is stopped
• Press CD TEXT on the set to see the following information,
which will be scrolled once (if available):
– Album title
– Artist’s name on album
CD text during playback
• Press CD TEXT on the set to see the following information,
which will be scrolled once (if available):
– Artist’s name on track (on CD recorder only)
– Track title
1 Set MIC LEVEL to the minimum level to prevent acoustic
feedback (e.g. a loud howling sound) before you connect
the microphone.
2 Connect a microphone to MIC.
3 Press CD 1, CD 2, CD 3, CDR, TUNER or
DIGITAL / ANALOG AUX to select the source you wish to
mix the microphone with.
4 Play the selected source.
5 Adjust the volume by using MASTER VOLUME.
6 Adjust the desired mixing level between source and
microphone by turning MIC LEVEL.
7 Start singing or talking through the microphone.
Note: Keep the microphone away from the speakers to
prevent a howling sound.
Microphone mixing
R
D
S
N
E
W
S
/T
A
A
BLE
MIN
I HIFI SYSTEM
C
D
T
E
X
T
C
L
O
C
K
/T
IM
E
R
CD text
SHUFFLE and REPEAT
Selecting a track and searching
Selecting a disc on the CD changer
English