Filter
Top Products
BASIC FUNCTIONS
13
Volume adjustment
• Adjust the volume by using MASTER VOLUME
(-VOLUME/+on the remote control).
yThe volume level in dB (decibel) is displayed.
Incredible Surround
Stereo sound is determined by the distance between the front
speakers. Incredible Surround enables you to enjoy an incredibly
wide stereo effect, regardless of the speakers’ distance.
• Press INCREDIBLE SURR. (INCREDIBLE SURROUND on the
remote control) to switch the surround sound effect either
on or off.
y
INCREDIBLE SURROUND
is shown and Incredible
Surround is displayed if the surround sound effect is on.
Note: The effect of Incredible Surround may vary with
different types of music.
Treble and Bass level adjustment
1 Press TREBLE or BASS on the set.
yThe volume rotary is activated to select the treble/bass
settings.
2 Turn the volume rotary to adjust the treble or bass.
yTreble or Bass and the actual value (between –5
and +5) is displayed briefly.
Note: If the volume rotary is not turned for 5 seconds, it will
switch back to volume.
PURE
• Press PURE repeatedly to switch bass and treble settings
either on or off.
yPURE is shown and Pure is displayed if bass and treble
settings are switched off.
yOptimal is displayed if preset bass and treble
settings are switched on.
yPersonal is displayed if personal preset bass and
treble settings are switched on.
LOUDNESS
• Press LOUDNESS to switch loudness either on or off.
yLOUDNESS is shown and Loudness is displayed if
loudness is on.
MUTE
This feature allows you to temporarily switch off the sound
without switching off the set.
1 Press MUTE on the remote control to switch off the sound.
yMute is displayed and playback/recording will be
continued without sound.
2 Press MUTE on the remote control again to switch on the
sound again.
Speaker balance
It is possible to adjust the relative volume balance between
the connected front speakers.
• Press L BALANCE or R BALANCE on the remote control to
adjust the relative volume of the left or right front speaker.
yBalance L (or R) and the actual volume of the left
(or right) front speaker are displayed.
yWhen the volume of both speakers is balanced,
Balance L=R is displayed.
The demo mode displays various features of the set and will
start automatically.
• If any source key is pressed:
yThe set switches to the selected source.
If y STANDBY ON is pressed:
yThe set switches to standby. After a few seconds, the
demonstration will start again.
Cancelling the demo mode
• Keep Ç STOP on the set pressed for at least 3 seconds to
cancel the demo mode.
yThe demo mode is cancelled permanently. The set
switches to standby. A few seconds later the set
switches to an economy power save mode.
Demo mode
Sound control
English
REC TYPE
T
C
O
M
P
IL
E
C
D
F
IN
A
L
IZ
E
E
R
A
S
E
C
D
C
D
RECORD