Filter
Top Products
CLOCK/TIMER
28
You can select different timer functions which will be activated
at a chosen time. Make sure the clock is set before using one
of these features.
Alarm timer setting
The unit can be used as an alarm clock, whereby the tuner,
CD recorder or CD changer starts playback automatically at a
preset time.
1 Press y STANDBY ON as often as necessary on the unit to
switch the unit to standby.
2 Press CLOCK/TIMER on the unit.
3 Rotate í JOG CONTROL ë to select the alarm timer.
yAlarm is displayed, ALARM is blinking.
4 Press YES to confirm the selection.
yThe hour digit is blinking.
5 Rotate í JOG CONTROL ë to set the hour.
6 Use à SEARCH or á SEARCH on the unit to move from
hour to minutes.
7 Rotate í JOG CONTROL ë to set the minutes.
8 Press YES to confirm the time settings.
9 Rotate í JOG CONTROL ë to select the source you want
to be woken up with.
10 Press YES on the unit to confirm the source selection.
• To stop the alarm, press y STANDBY ON on the unit.
Record timer setting
The unit can do recordings automatically from an external
source or from a preset radio station at a preset time.
1 Follow steps 1 and 2 of “Alarm timer setting”.
2 Rotate í JOG CONTROL ë to select the record timer.
yRec Timer is displayed, REC is shown and X starts
blinking.
3 Press YES on the set to confirm the selection.
yThe day of the week blinks.
4 Rotate í JOG CONTROL ë to set the day of start of
recording.
5 Use à SEARCH or á SEARCH on the unit to move from
day to the hour of start of recording.
6 Rotate í JOG CONTROL ë to set the hour of start of
recording.
7 Continue this procedure by using à SEARCH or
á SEARCH to move on to minutes of start of recording
and to hour and minutes of end of recording. After each
move, always rotate í JOG CONTROL ë to do the
settings.
8 Press YES to confirm the settings.
9 Rotate í JOG CONTROL ë to select from which you
want to record.
If you have chosen the tuner as source:
Rotate í JOG CONTROL ë again to select a preset radio
station and confirm this selected station by pressing YES.
10 Press YES on the unit to confirm the source selection.
• To stop the recording press Ç STOP on the unit.
• Press TIMER ON/OFF on the remote control repeatedly to
switch the alarm and/or record timer on or off:
y ALARM is shown and Alarm ON is displayed when the
alarm timer is on.
y REC is shown and REC Timer ON is displayed when
the record timer is on.
y ALARM and REC are shown, REC+Alarm ON is
displayed when the alarm and record timer are on.
y ALARM and REC go off, REC+AlarmOFF is displayed
when the alarm and record timer are off.
You can set a certain period of time before the unit switches off.
1 Press SLEEP on the remote control until the desired sleeper
time is displayed.
ySLEEP is shown and Sleep 60 min, 45 min, 30
min,15 min is displayed or, Sleep OFF is displayed.
2 As soon as the desired time is displayed, do not press
SLEEP again.
yAfter the chosen time has elapsed, the unit switches to
standby.
• To deactivate the sleep timer, press SLEEP on the remote
control until Sleep OFF is displayed.
Sleep timer
Switching the alarm and record timer on/off
Record timer
Alarm timer
English