Filter
Top Products
BASIC FUNCTIONS
12
• To switch the unit on press y STANDBY ON on the unit.
• To switch the unit to standby press y STANDBY ON
again on the unit (2 on the remote control).
Important!
1) This system is designed for regular CD(RW)s.
Therefore, do not use any accessories such as disc
stabilizer rings or CD treatment sheets, etc. as offered
on the market, because they may cause jamming of
the changer mechanism.
2) Do not load more than one disc into one disc tray.
1 CD changer:
Press OPEN/CLOSE on the unit to open the CD changer tray.
yOpen CDC is displayed and the tray is opened.
CD recorder:
Press OPEN/CLOSE on the unit to open the CD recorder tray.
yOpen CDR is displayed and the tray is opened.
2 CD changer:
You can load up to three discs in the CD changer for
continuous playback without interruption. Insert an
audio disc (printed side up) in the right disc tray.
• You can load another disc in the left disc tray.
• To insert a third audio disc, press CD CHANGE on the unit.
yThe CD carousel will rotate until the empty disc tray
is at the right hand side.
CD recorder:
Insert an audio disc (printed side up) in the tray.
3 CD changer:
Press OPEN/CLOSE on the unit again to close the tray.
yThe tray is closed and Reading is displayed.
yCD, the disc tray number, the total number of tracks and
the total playing time of the disc in the last selected disc
tray are displayed. The track numbers light up in the music
calendar.
CD recorder:
Press OPEN/CLOSE on the unit again to close the tray.
yThe tray is closed and Reading is displayed.
yIf an unfinalized disc is inserted, Initializing will
be displayed.
yCDR, the total number of tracks and the total playing time
of the disc are displayed. The track numbers light up in the
music calendar.
1 Press É PLAY/PAUSE (ÉÅon the remote control) to start
playback.
CD changer:
yCD, the disc tray number, the current track number and
elapsed playing time are displayed. The current track
number is also blinking in the music calendar.
CD recorder:
yCDR, the current track number and elapsed playing time
are displayed. The current track number is also blinking
in the music calendar.
• To switch through the following information, repeatedly
press DISPLAY on the unit:
yTrack number, remaining playing time of current track
yTrack number, remaining playing time of disc
yCD text, if available
yTrack number, actual playing time of current track
2 Press Ç STOP (Çon the remote control) to stop playback.
CD changer:
yCD, the disc tray number, the total number of tracks and
the total playing time of the disc are displayed.
CD recorder:
yCDR, the total number of tracks and the total playing
time of the disc are displayed.
• To switch through the following information, repeatedly
press DISPLAY on the unit:
yTotal number of tracks, total playing time of disc
yCD text is displayed.
• You can interrupt playback by pressing É PLAY/PAUSE
(ÉÅon the remote control).
yThe time where playback was interrupted is blinking.
• To resume playback press É PLAY/PAUSE (ÉÅon the
remote control) again.
Playing a CD(RW)
Loading the CD changer, CD recorder
Switching on, switching to standby
CD CHANGE
OPEN/CLOSE
DISPLAY
CDR
iR SENSOR
TUNER
DIGIT
AL / ANALOG
AUX
CD TEXT
CLOCK
/
TIMER
OPEN
/
CLOSE
MIC
MIC
LEVEL
STANDBY
ON
CD
1
CD 2
CD 3
REC TYPE
EDIT
COMPILE CD
COPY CD
RECORD
CD
RECORDER
DC
CHA
NGER
FINALIZE CD
ERASE CD
MASTER
VOLUME
CD
-
TEXT EDITING
English