Filter
Top Products
INTERNAL RECORDING
18
High speed recording of an entire disc, a track, a
program or a track edit
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Press either CD 1, CD 2 or CD 3 to select the disc from
which you wish to record.
3 Press REC TYPE on the unit to enter into the recording menu.
4 Rotate í JOG CONTROL ë to select one of the
following high speed recording modes:
If a disc from the CD changer is selected:
yCD Fast?: for high speed recording of an entire disc
• Continue with step 5.
yTrack Fast?: for high speed recording of a track
• Press YES to confirm.
• Rotate í JOG CONTROL ë to select the track.
yRec Tr and the track number is displayed.
• Continue with step 6.
If CD changer program mode is available:
yProg Fast?: for high speed recording of the selected
disc or of the program
If CD changer track edit mode is available:
yA-B Fast?: for high speed recording of the A–B track
5 Press YES to confirm your selection.
yBoth decks will be selected in the display, the arrow
starts blinking. The remaining recording time of the
CDR(W), the total recording time of the CDR(W) and
either Record CD1 (or 2, 3)?, Record Prog? or
Record A-B? is displayed.
Note: When the CDR(W) already contains a recording, ALC
will also become active and ALC will be shown.
6 Press YES to start high speed recording.
yThe arrow lights, RECORDING IN PROGRESS is shown, high
speed recording starts and the actual recording time
remaining starts to count down.
• To stop recording, press Ç STOP on the unit.
Normal recording and listening of an entire disc, a
track, a program or a track edit
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Follow steps 2 and 3 of “High speed recording”.
3 Rotate í JOG CONTROL ë to select one of the
following normal record options:
If CD changer is selected:
yCD Listen?: for listening to the entire disc during
normal recording
yTrackListen?: for listening to the track during
normal recording
• Press YES to confirm.
• Rotate í JOG CONTROL ë to select the desired
track.
yRec Tr and the track number is displayed.
• Continue with step 6 of “High speed recording”.
If CD changer program mode is available:
yProg Listen?: for listening to the program during
normal recording
If CD changer track edit mode is available:
yA-B Listen?: for listening to the A–B track during
normal recording
4 Follow steps 5 and 6 of “High speed recording”.
• To stop recording, press Ç STOP on the unit.
DO NOT FORGET TO FINALIZE!
Finalizing a CDR(W) disc is a simple procedure, necessary to:
– play a recorded CDR on a standard CD player or
– play a recorded CDRW on a CDRW compatible CD player
and CD recorder.
Normal recording and listening
High speed recording
English
DISPLAY
CDR
iR SENSOR
TUNER
DIGITAL / ANALOG
AUX
CD TEXT
CLOCK
/
TI
M
OPEN
/
CLOSE
MIC
M
IC
LEVEL
STANDBY
ON
CD
1
CD 2
CD 3
REC TYPE
EDIT
COMPILE CD
COPY CD
RECORD
CD
RECORDER
FINALIZE CD
ERASE CD
MASTER
VOLUME
CD
-
TEXT EDITING