Filter
Top Products
POWER
MARKER
SEARCH MODE
DISPLAY SLOWZOOM
OUTPUT SELECT
3
4
5
6
7
8
9
SPEED
TIMER SET
0
+
10
2
1
VCRDVD
CLEAR
REPEAT
SETUP
TITLE
RETURN
MODE
CHANNEL/SKIP
A-B
AUDIO
ANGLESUBTITLE
REC/OTR
REPEAT
DISC
MENU
OK
PAUSE
REW FF
PLAYSTOP
VCR/TV
MEMORY
STATUS/EXITTIME SEARCH
24 Channel Setup
SELECT op CHOOSE B
→PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
• You cannot enter the TUNER SET
UP menu when you are in Line
Input mode (channel 001 or 002).
When you select channel 001 or
002, AV REAR or AV FRONT will
appear on the screen briefly.
• You cannot program channels if you
are using a Cable Box or DBS.
• If you have an antenna, channels 2-
69 will be available. If you have
Cable TV, channels 1-125 will be
available.
Helpful Hints
Although your DVD/VCR may automatically memorize the chan-
nels you receive when you turn it on for the first time, you can
set up the channels again.
● Before you begin, place the DVD/VCR in VCR mode. Press
OUTPUT SELECT so the green VIDEO light appears on the
front of the DVD/VCR. Press VCR/TV so the green VCR/TV
light appears on the front of the DVD/VCR.
1
Press VCR, then press DISC/MENU.
2
Press PLAY B (o) or STOP C (p) to select
TUNER SET UP, then press FF g (B).
SELECT op CHOOSE B
→AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO ON
2ND AUDIO
TO END PUSH EXIT
3
Press PLAY B (o) or STOP C (p) to select AUTO
PROGRAMMING, then press FF g (B). The
DVD/VCR will memorize all the channels you receive.
4
Wait for a few minutes while the DVD/VCR sets up
the channels. When this is complete, CHANNELS ARE
SET will appear on the screen. Then the programming of
the lowest channel number placed in the DVD/VCR’s
memory will appear on the screen. Now when you press
CHANNEL/SKIP j/i (p/o), you will scan only
through channels you receive. You still can select any chan-
nel number using the Number buttons.
2,3
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
START FINISH
1
DVD740VR 4/12/02 12:08 PM Page 24