Filter
Top Products
10
The unit automatically stores radio »
stations with suffi cient signal strength.
When all the available radio stations »
are stored, the fi rst preset radio station
is broadcast automatically.
Set clock
1 In the standby mode, press CLOCK SET
to enter the clock setting mode.
2 Press / repeatedly to select 12 hour or
24 hour format.
3 Press CLOCK SET to confi rm.
The hour digits are displayed and begin »
to blink.
4 Press / to set the hour.
5 Press CLOCK SET to confi rm.
The minute digits are displayed and »
begin to blink.
6 Press / to set the minute.
7 Press CLOCK SET to confi rm the clock
setting.
Turn on
1 Press .
The unit switches to the last selected »
source.
Switch to standby
1 Press again to switch the unit to
standby mode.
The clock (if set) appears on the »
display panel.
To switch the unit to Eco Power Standby
mode:
1 In the standby mode, press and hold
for more than 2 seconds.
The backlight on the display panel »
turns off.
Note
The type plate is located on the bottom of the •
main unit.
1 Connect one end of the AC adaptor to
the DC IN socket on the bottom of the
main unit.
2 Connect the other end of the AC
adaptor to the wall outlet.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1 Connect the unit to the power supply.
[AUTO INSTALL - PRESS PLAY] (auto »
install - press the PLAY button) is
displayed.
2 Press on the main unit to start
installation.
[AUTO] (auto) is displayed. »
EN
MCM330_12_IFU_Book 1.indb Sec1:10MCM330_12_IFU_Book 1.indb Sec1:10 3/20/2009 5:11:51 PM3/20/2009 5:11:51 PM