Philips MCM330 MP3 Player User Manual


 
13
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
“RDS” is displayed.
Display RDS information
1 For a FM station with RDS, press RDS
repeatedly to display various broadcast
information.
Other features
Set the alarm timer
This unit can be used as an alarm clock. The
disc/radio/USB/SD/MMC is activated to play at
a preset time.
1 Ensure that you have set the clock
correctly.
2 Press to switch to standby mode.
3 Press TIMER .
A prompt to select the source is »
displayed.
4 Press CD , or TUNER or USB/SD to
select a source.
5 Press TIMER to con rm.
The clock digits are displayed and »
begin to blink.
6 Press / to set the hour.
7 Press TIMER to con rm.
8 Press / to set the minute.
The timer is set and activated. »
To deactivate or re-activate an alarm timer
1 Press TIMER ON/OFF repeatedly to
activate or deactivate timer.
If timer is activated, the display shows »
.
If timer is deactivated, »
disappears on
the display.
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations (FM).
1 In the tuner mode, press and hold PROG
for more than 2 seconds to activate
automatic program mode.
[AUTO] (auto) is displayed. »
All available stations are programmed »
in the order of waveband reception
strength.
The rst programmed radio station is »
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations (FM).
1 Tune to a radio station.
2 Press PROG to activate program mode.
[PROG] (program) is displayed. »
3 Press / to allocate a number to this
radio station, then press PROG to
con rm.
4 Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store
another station in its place.
Select a preset radio station
1 In tuner mode, press / to select a
preset number.
Tip
Position the antenna as far as possible from
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
the position of the antenna.
English
EN
MCM330_12_IFU_Book 1.indb Sec1:13MCM330_12_IFU_Book 1.indb Sec1:13 3/20/2009 5:11:54 PM3/20/2009 5:11:54 PM