Filter
Top Products
9
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from •
heat, sunshine or fi re. Never discard batteries
in fi re.
For fi rst-time use:
1 Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert 1 CR2025 battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Note
Before pressing any function button on the •
remote control, fi rst select the correct source
with the remote control instead of the main
unit.
If you are not going to use the remote control •
for a long time, remove the battery.
Connect power
Caution
Risk of product damage! Ensure that the •
power supply voltage corresponds to the
voltage printed on the bottom of the unit.
Risk of electric shock! When you unplug the •
AC adaptor, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC adaptor, ensure you
•
have completed all other connections.
q MUTE
Mute volume.•
r VOL +/-
Adjust volume.•
s DISPLAY
Select display information.•
t TIMER ON/OFF
Turn on or off alarm timer.•
u TIMER
Set the alarm timer.•
v SLEEP
Set the sleep timer.•
3 Get started
Caution
Use of controls or adjustments or •
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Placement
You can place the unit on a fl at surface or
mount the unit on a wall.
Mount on a wall
To wall mount the unit, see the included
separate sheet of wall mounting instructions.
English
EN
MCM330_12_IFU_Book 1.indb Sec1:9MCM330_12_IFU_Book 1.indb Sec1:9 3/20/2009 5:11:50 PM3/20/2009 5:11:50 PM