Filter
Top Products
/00_3139 246 13873
English
35
Subwoofer frequency
Enables you to select Subwoofer
frequency output between 120Hz {LOW}
and 200Hz {HIGH}.
SACD Direct
Enables you (with a suitable speaker
system where the satelite speaker has
sufficient bass response to 40Hz) to
bypass the bass management system for
multi-channel SACD playback. This helps
to preserve maximum sound quality of
your SACD.
➜
On – Select this to enjoy pure SACD
quality.
➜
Off – When set to OFF, the speaker
settings will applied during multi-channel
SACD playback (see page 21).
HDMI audio
This feature is available for automatic
audio selection only when HDMI devices
is connected and recognised.
➜
On – HDMI will output whatever is on
the SPDIF connector (depending on the
setting of ‘Digital Output’ and the disc.
➜
Off – HDMI audio stream muted.
PCM Output
Allows you to select PCM digital output
between 48kHz and 96kHz.
➜
48kHz – A 96kHz PCM data disc will
be converted to 48kHz.
➜
96kHz – 96kHz PCM audio on non-
copy protected DVD discs will be played
back at 96kHz. For copy protected discs,
the digital output will be downsampled to
48kHz.
Speakers (Advance Bass
Management)
This menu contains setup options for
your audio output which makes the
speaker setup system reproduce high
quality surround sound. For details, see
page 21.
DVD Menu Options
TIPS: To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
Features
Use ← or → to select other options, ↓ to enter the submenu,
RETURN to leave the menu.
Features Access
PBC
Sleeptimer
Setup
PBC (Playback Control)
Playback Control feature (only for VCD
2.0) can be set to {ON or OFF}.
If ‘ON’ is selected, the disc menu (if
available on the disc) will appear on the
TV.
Sleep Timer
Sleep timer turns this DVD Player to
standby mode when playback is stopped
for 20 minutes.
➜
On – DVD Player will go to standby
after a pre-defined time.
➜
Off – Select this to disable the {SLEEP
TIMER}.
01-41 DVP900_00A31 13/01/2005, 09:5835