Filter
Top Products
15
10 Other features
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1 When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
When sleep timer is activated, the »
display shows
.
To deactivate sleep timer
1 Press SLEEP/TIMER repeatedly until
[OFF] is displayed.
When sleep timer is deactivated, »
disappears on the display.
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER or iPod source is activated to
play at a preset time.
1 Ensure that you have set the clock
correctly.
2 In the standby mode, press and hold
SLEEP/TIMER.
3 Press DISC , TUN or iPod to select a
source.
4 Press SLEEP/TIMERWRFRQÀUP
The hour digits are displayed and begin »
to blink.
5 Press / to set the hour.
6 Press SLEEP/TIMERWRFRQÀUP
The minute digits are displayed and »
begin to blink.
7 Press / to set the minute.
8 Press SLEEP/TIMERWRFRQÀUP
The timer is set and activated.»
Program radio stations
manually
Note
You can program a maximum of 40 preset
radio stations.
1 Tune to a radio station.
2 Press PROG to activate program mode.
[PROG] (program) blinks on the »
display.
3 Press PRESET +/- to allocate a number
(1 to 20) to this radio station, then press
PROGWRFRQÀUP
The preset number and the frequency »
of the preset station are displayed.
4 Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store
another station in its place.
Select a preset radio station
1 Press PRESET +/- to select a preset
number.
Tip
)0DQWHQQDLVÀ[HGWRWKHPDLQXQLW
Position the antenna as far as possible from
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
the position of the antenna.
English
EN