Filter
Top Products
11
5 Play a disc
1 Press DISC to select the disc source.
2 Press on the top panel of the unit.
The disc door opens.»
3 Place a disc onto the tray and press
again.
Ensure that the label side faces »
upwards.
4 Play starts automatically.
If play does not start, press
/ to
select a track and then press OK/
.
Turn on
1 Press POWER.
The unit switches to the last selected »
source.
Switch to standby
1 Press POWER to switch the unit to
standby mode.
The backlight on the display panel is »
dimmed.
The clock (if set) appears on the »
display panel.
Set clock
1 In the standby mode, press and hold
CLOCK/DISPLAY to activate the clock
setting mode.
The 12 hour or 24 hour format is »
displayed.
2 Press PROG repeatedly to select 12 hour
or 24 hour format.
3 Press CLOCK/DISPLAYWRFRQÀUP
The hour digits are displayed and begin »
to blink.
4 Press / to set the hour.
5 Press CLOCK/DISPLAYWRFRQÀUP
The minute digits are displayed and »
begin to blink.
6 Press / to set the minute.
7 Press CLOCK/DISPLAYWRFRQÀUP
Tip
To view the clock during play, press CLOCK/
DISPLAY repeatedly until the clock is
displayed.
English
EN