Filter
Top Products
11
Set time and date
1
In standby mode, press and hold SET
TIME/PROG for 2 seconds.
[12 HR] begins to blink.»
2 Press OK/ to select the 12/24 hour
format.
3 Press SET TIME/PROGWRFRQÀUP
The hour digits begin to blink.»
4 Press / to set the hour.
5 Press SET TIME/PROGWRFRQÀUP
The minute digits begin to blink.»
6 Repeat steps 4-5 to set the minute, year,
month, and day.
Tip
In 12 hour format, [MONTH--DAY] is
displayed.
in 24 hour format, [DAY--MONTH] is
displayed.
Turn on
1
Press POWER.
The unit switches to the last selected »
source.
Switch to standby
1 Press POWER again to switch the unit to
standby mode.
The time and date (if set) appear on »
the display panel.
1 Open the battery compartment.
2 Insert 2 x R6/UM-3/AA size batteries
with correct polarity (+/-) as indicated.
3 Close the battery compartment.
Connect power
Caution
Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure
you have completed all other connections.
Note
The type plate is located on the bottom of the
main unit.
1 Connect the AC power cord to the wall
outlet.
English
EN