Filter
Top Products
2 Press USB/CD to enter CD mode if USB is
displayed.
➜ Display will show cd (See 5). or No if
no disc in(See 6)
3 Open the disc door.
4 Insert a disc with the printed side facing up
and press the disc door gently to close.
➜ Display:The total number of tracks
appears.
➜The disc scanning of MP3-CD may run
longer than audio CD.
5 Press
2;
to start playback.
➜ Display:
2
and the current track number.
For MP3-CD/ WMA only:
➜The current track number “XXX“ and file
format will be displayed (See 7).
6 To pause playback press
2;
.
➜ Display:
2
and the current track number
flash.
7 Press
2;
again to resume playback.
8 To stop playback, press
9
.
Helpful hints:
The disc playback will also stop when:
–you open the disc compartment door;
–you select FM or OFF position;
– the disc has reached the end of the playback.
Selecting a different track
• Press∞ or § once or repeatedly until the
desired track number appears in the display.
For MP3-CD/WMA:First press
ALBUM 3 / 4 once or more to find your
album.
• In the pause/stop position,press 2; to start
playback.
Finding a passage within a
track
1 During playback, press and hold down
∞ or §
.
➜ The disc is played at high speed and low
volume.
2 When you recognize the passage you want,
release
∞ or §
.
➜ Normal playback resumes.
Programming tracks
You may store up to 40 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press PROG to start
programming.
➜ Display shows p 01 indicating the start
of the program. And the track number
“XXX“ flashes (See 8)
2 Press
∞
or
§
to select your desired track
number.
For MP3-CD/WMA:
First press
ALBUM
3/4 once or more to
find your album.
3 Press PROG to store the desired track.
➜ Display shows p 02, indicating the next
program location available.
4 Repeat steps 2 to 3 to select and store all
desired tracks.
5 Press
2;
to play the program.
To review your program
In the stop position, press and hold PROG 3
seconds.
➜The display shows all the stored tracks in
sequence.
Helpful hints:
– Display shows p 01 if no track is
programmed.
– If you try to store more than 20 tracks, no
track can be stored and the display will show
FUL.
MP3-CD/ CD Player
AZ1856_Eng_93_CCR 2008.3.12 13:26 Page 10