Filter
Top Products
6 EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the docking system.
• Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Note
• The type plate is located on the bottom of the docking
system.
Connect the AC power adapter between
• the DC IN socket at the back of the
docking system, and
• the power supply.
Turn on
Press POWER.
» The docking system switches to the last
selected source.
Switch to standby mode
Press POWER again to switch the docking
system to standby mode.
» The clock (if set) is displayed.
Select a source
Press SOURCE/SET repeatedly to select a
source: FM preset, FM, Bluetooth, or AUX in.
Note
• When an android-powered device is docked, the
system automatically switches to Bluetooth mode.
Set time
1 Press and hold SOURCE/SET for two
seconds.
» [24H] or [12H] begins to blink.
2 Press - TUNE/TIME or TUNE/TIME+ to
select [24H] or[12H] for 12 or 24 hour
format.
3 Press SOURCE/SETtoconrm.
» The hour and minute digits begin to
blink.
4 Press - TUNE/TIME or TUNE/TIME+
repeatedly to set the hour.
ON Standby
POWER