Filter
Top Products
16
Set time zone, daylight saving time, •
and time format.
Select Air/Cable connecting.•
Auto scan/Manual scan.•
Play options
1 During play, press OPTIONS to select
play options.
2 Follow the on-screen instructions.
Play from an external device
You can also listen to an external audio device
through this unit.
1 Press PUSH at the bottom of the set to
release TV panel.
2 Pull down the panel.
3 Turn around the panel to face the rear of
the panel.
4 Open the door to get the MP3 link cable.
5 Connect the built-in MP3 link cable to the
headphone jack on an external device.
6 Press MP3 LINK to select the MP3 link
source.
[AUX IN] (AUX IN) is displayed for »
fi ve seconds.
7 Start to play the device (see the device
user manual).
4 Play
Watch TV
Note
Before you start, ensure that you have •
connected the antenna to the unit.
Make sure you are in an area with suffi cient
•
signal coverage. You can check the signal
coverage with the TV broadcast authority of
your country or visit www.philips.com/support.
Lift up TV panel
1 Press PUSH at the bottom of the set to
release TV panel.
2 Pull down the panel.
3 Turn around the panel to face the screen.
4 Adjust the screen to a suitable angle.
Setup your TV
For the fi rst-time use:
1 Press ATSCTV to enter TV mode.
[Atsc] (Atsc) is displayed.»
» First time installation is displayed on
the TV panel.
2 Press / to switch to an item.
3 Press / to select an option.
4 Select Air/Cable connecting.
Auto search starts. »
All available TV channels will be »
searched and stored.
Normally set up your TV:
1 During play, press SETUP.
2 Press / to switch to an item.
3 Press / to select an option.
Select menu language.•
Turn on/off caption.•
EN