Filter
Top Products
15
Set time
1 In standby mode, press and hold CLOCK
for 2 seconds.
The hour digits begin to blink.»
2 Press / or TIMER/VOL to set the
hour.
3 Press OK or to confi rm.
The minute digits begin to blink.»
4 Press / or TIMER/VOL to set the
minute.
[12 HR] begins to blink.»
5 Press / or TIMER/VOL to select the
12/24 hour format.
6 Press OK to confi rm.
Turn on
1 Press .
The unit switches to the last selected »
source.
Switch to standby
1 Press again to switch the unit to
standby mode.
The clock (if set) appears on the »
display panel.
English
EN