Filter
Top Products
SLEEP
(See 6)
About Sleep
This set has a built-in sleep timer, which enables the radio to be automatically
switched off after a set period of time. There are four sleep time options.
Setting and switching off SLEEP
1 Within 1 second,
press
ALARM RESET / SLEEP
twice until the display shows
SLEEP and SL: 60
.
™
The radio is automatically switched on and tunes to the last station.
2 To select other sleep time options, press ALARM RESET / SLEEP
again within 1
second before the display returns to clock time.
™
The display shows in sequence: SL : 30, SL : 15 and OFF.
3
To cancel sleep, press either:
–
RADIO ON/OFF
– REPEAT
ALARM /
BRIGHTNESSCONTROL.
–
ALARM RESET / SLEEP
once or more until
SLEEP
disappears from the
display.
USING THE PROJECTION
You may have the experience of looking for a clock in the darkness. With this
projection feature, you can conveniently project the clock time onto a surface
e.g. walls ceiling (furniture, glasses not recommended).
1 Press PROJECTION ON/OFF
to switch on.
™
The Projection lens lights up red.
2 Turn the Projection lens wheel (maximum 180 degree left or right) and also the
set, if necessary, to find a suitable projection surface.
(See 7)
3 To change the projected time upside down, press REVERSE PROJECTION.
4. To change the projection slightly to a different angle, turn the ROTATE PROJEC-
TION ball (maximum 60 degree left or right.).
5. Press PROJECTION ON/OFF to switch off.
™
The Projection lens goes out.